source: ffmpeg

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Graph Diff Rev Age Author Log Message
(edit) @9671db82   13 years justin.ruggles libgsmdec: do not needlessly set *data_size to 0
(edit) @a2e25578   13 years justin.ruggles gsmdec: do not needlessly set *data_size to 0
(edit) @fc43fc9f   13 years justin.ruggles gsmdec: add flush function to reset the decoder state when seeking
(edit) @b03761b   13 years justin.ruggles libgsmdec: check output buffer size before decoding
(edit) @bac2597a   13 years justin.ruggles gsmdec: log error message when output buffer is too small. also …
(edit) @d9c6eec   13 years justin.ruggles gsm: use av_get_bytes_per_sample() in frame_bytes calculation
(edit) @87c57d80   13 years justin.ruggles Create separate functions for the raw GSM demuxer. Put the new raw …
(edit) @c6cd0e17   13 years diego Replace vendor string in Ogg and FLAC muxers.
(edit) @f36b3902   13 years diego Replace some forgotten FFmpeg references by Libav.
(edit) @959cfbf3   13 years diego vsrc_testsrc: fix mailing list reference URL
(edit) @2f5df0b1   13 years diego Replace ffmpeg references with more accurate libav* references.
(edit) @20566eb0   13 years diego Replace outdated references to ffmpeg tool with avconv.
(edit) @124e2884   13 years diego Remove some stray unnecessary ffmpeg references.
(edit) @d1dfcb08   13 years diego vp3: remove some pointless comments
(edit) @ec22979a   13 years anton id3v2: fix type of ID3v2EMFunc.free()
(edit) @5511ad14   13 years anton lavc: use designated initialisers for parsers.
(edit) @da249637   13 years justin.ruggles g726dec: add flush() function to reset state when seeking
(edit) @97f5dd1d   13 years justin.ruggles g726: don't pass index to g726_reset() calculate it from c->code_size …
(edit) @615b2a2c   13 years justin.ruggles g726enc: add private option for setting code size directly. This is …
(edit) @7abb73d   13 years justin.ruggles g726: wrap the decoder functions with a CONFIG_ADPCM_G726_DECODER check
(edit) @437c11ca   13 years justin.ruggles g726: group the g726_encoder AVCodec with the other encoding functions
(edit) @50969c0f   13 years justin.ruggles g726: return AVERROR(EINVAL) instead of -1 for invalid channel count
(edit) @50c466d6   13 years justin.ruggles g726enc: use av_assert0() for sample_rate validation This should …
(edit) @9e78d8cf   13 years justin.ruggles g726: treat sample rates other than 8kHz as unofficial.
(edit) @6e8d4a7a   13 years justin.ruggles g726dec: remove the sample_rate validation
(edit) @6ac34eed   13 years justin.ruggles g726: use bits_per_coded_sample instead of bitrate to determine mode …
(edit) @d405237b   13 years justin.ruggles g726: split the init function for the encoder and decoder This also …
(edit) @c8d36d25   13 years justin.ruggles g726: pre-calculate the number of output samples. Allows for checking …
(edit) @e61a670b   13 years justin.ruggles g726: use int16_t instead of short
(edit) @7b7b220c   13 years martin Enable w32threads automatically unless explicitly disabled …
(edit) @02170990   13 years martin cmdutils: Rename read_file to cmdutils_read_file This symbol name …
(edit) @45235d69   13 years diego libdirac/libschroedinger: Drop unnecessary symbol prefixes. The names …
(edit) @d94c577d   13 years janne-libav cmdutils: check fread() return value
(edit) @7d1b17b8   13 years justin.ruggles cin audio: use sign_extend() instead of casting to int16_t
(edit) @405af431   13 years justin.ruggles cin audio: restructure decoding loop to avoid a separate counter …
(edit) @859bdc33   13 years justin.ruggles cin audio: use local variable for delta value
(edit) @64e19ba4   13 years justin.ruggles cin audio: remove unneeded cast from void*
(edit) @03381c12   13 years justin.ruggles cin audio: validate the channel count
(edit) @664eb77d   13 years justin.ruggles cin audio: remove unneeded AVCodecContext pointer from CinAudioContext
(edit) @44d2a982   13 years justin.ruggles dsicin: fix several audio-related fields in the CIN demuxer …
(edit) @5bd0343b   13 years justin.ruggles flacdec: use av_get_bytes_per_sample() to get sample size
(edit) @272fcc32   13 years justin.ruggles dca: handle errors from dca_decode_block() Return error if core block …
(edit) @aae6eead   13 years justin.ruggles dca: return error if the frame header is invalid
(edit) @f44059d2   13 years justin.ruggles dca: return proper error codes instead of -1
(edit) @46e1af3b   13 years lu_zero utvideo: handle empty Huffman trees If the frame is filled with the …
(edit) @425a843   13 years justin.ruggles binkaudio: change short to int16_t
(edit) @4f4e1948   13 years justin.ruggles binkaudio: only decode one block at a time. This prevents truncating …
(edit) @eaddd29e   13 years justin.ruggles binkaudio: store interleaved overlap samples in BinkAudioContext. …
(edit) @9f48039   13 years justin.ruggles binkaudio: pre-calculate quantization factors
(edit) @101ef19e   13 years justin.ruggles binkaudio: add some buffer overread checks. This stops decoding …
(edit) @20732246   13 years justin.ruggles atrac3: support float or int16 output using request_sample_fmt
(edit) @a0478513   13 years justin.ruggles atrac3: add CODEC_CAP_SUBFRAMES capability the decoder can handle …
(edit) @8f98577d   13 years justin.ruggles atrac3: return appropriate error codes instead of -1
(edit) @47b61702   13 years justin.ruggles atrac3: make sure all memory is freed on init failure
(edit) @c9161385   13 years justin.ruggles atrac3: add a couple macro constants
(edit) @1fead73d   13 years justin.ruggles atrac3: return error if packet is too small
(edit) @7e4881a   13 years justin.ruggles atrac3: check output buffer size before decoding
(edit) @6ba7f78b   13 years justin.ruggles atrac3: use separate pointers for each channel in decodeFrame()
(edit) @5e76b8bb   13 years justin.ruggles atrac3: use optimized float_interleave() function for stereo interleaving
(edit) @8af33cb3   13 years justin.ruggles atrac3: decode mono directly to the output buffer
(edit) @c4a6fde3   13 years justin.ruggles atrac3: decode output to float samples instead of converting to s16
(edit) @f20dd574   13 years justin.ruggles atrac1: return appropriate error codes instead of -1
(edit) @6dc7dd7a   13 years justin.ruggles atrac1: check for ff_mdct_init() failure
(edit) @21dcecc3   13 years justin.ruggles atrac1: use optimized float_interleave() function for stereo interleaving
(edit) @96b5702e   13 years justin.ruggles atrac1: fix a typo
(edit) @bff5b2c1   13 years justin.ruggles atrac1: validate number of channels
(edit) @9a35ff38   13 years justin.ruggles atrac1: decode mono audio directly to output buffer For stereo we …
(edit) @33684b9c   13 years justin.ruggles atrac1: check output buffer size before decoding
(edit) @5c353eb   13 years justin.ruggles cook: return AVERROR_PATCHWELCOME instead of ENOTSUP ENOTSUP is not …
(edit) @e34c6c97   13 years justin.ruggles cook: check output buffer size before decoding
(edit) @6631294c   13 years justin.ruggles cook: do not needlessly set *data_size to 0
(edit) @b277ebd5   13 years justin.ruggles cook: remove pointless return statements
(edit) @c9c841e   13 years justin.ruggles cook: simplify decouple_info()
(edit) @f193c96f   13 years justin.ruggles cook: return appropriate error codes instead of -1
(edit) @e694831   13 years justin.ruggles cook: avoid hardcoded sizes in sizeof()
(edit) @776e9815   13 years justin.ruggles cook: remove unneeded #includes
(edit) @c25df223   13 years justin.ruggles cook: output float samples instead of converting to int16
(edit) @69e7ad8d   13 years rsbultje mov: Avoid divide by zero in edit list dts handling Signed-off-by: …
(edit) @9a173575   13 years rsbultje utvideo: account for coupled lines in YUV420 format Luma slices in …
(edit) @8370e426   13 years rsbultje vp3: fix oob read for negative tokens and memleaks on error.
(edit) @bfa0f965   13 years rsbultje vp8: fix overflow in segmentation map caching.
(edit) @38a4be3f   13 years rsbultje lavf: use number of output pictures for delay checks. This fixes …
(edit) @640d5f1c   13 years rsbultje Fix decoding of lossless 4:2:2 H.264 Signed-off-by: Ronald S. Bultje …
(edit) @fdb5314e   13 years rsbultje Fix decoding of lossless 10-bit 4:4:4 H.264 Signed-off-by: Ronald S. …
(edit) @61856d06   13 years alex.converse probe: Restore identification of files with very large id3 tags and no …
(edit) @7a773d4d   13 years alex.converse probe: Remove id3 tag presence as a criteria to do file extension …
(edit) @ca65932b   13 years alex.converse mpegts: MP4 SL support
(edit) @c5302670   13 years alex.converse mpegts: MP4 OD support
(edit) @4682a1dc   13 years alex.converse mpegts: Add support for Sections in PMT
(edit) @fec28364   13 years alex.converse mpegts: Replace the MP4 descriptor parser with a recursive parser.
(edit) @c3bc6096   13 years alex.converse mpegts: Add support for multiple mp4 descriptors
(edit) @476d04a5   13 years alex.converse mpegts: Parse mpeg2 SL descriptors.
(edit) @77b5c82b   13 years alex.converse isom: Add MPEG4SYSTEMS dummy object type indication.
(edit) @bc2dd367   13 years janne-libav aacdec: allow output reconfiguration on channel changes Locking the …
(edit) @f3db0f7   13 years justin.ruggles nellymoserenc: take float input samples instead of int16 This avoids …
(edit) @77c8ef9a   13 years justin.ruggles nellymoserdec: use dsp functions for overlap and windowing
(edit) @8c9581f0   13 years justin.ruggles nellymoserdec: do not fail if there is extra data in the packet …
(edit) @0aaa85db   13 years justin.ruggles nellymoserdec: fail if output buffer is too small avoids silently …
(edit) @f19305fe   13 years justin.ruggles nellymoserdec: remove pointless buffer size check.
(edit) @854eadcc   13 years anton lavf: add init_put_byte() to the list of visible symbols.
Note: See TracRevisionLog for help on using the revision log.